Skip to content Skip to navigation menu

Liqui Moly Air Flow Sensor Cleaner 158g

SKU: OA04106
Special active solvent for fast and gentle cleaning of sensitive components of the air flow sensor in gasoline and diesel engines. The Cleaner also distinguishes itself by means of a very fast evaporation that is free of residues.
$21.99
4 payments of $5.50 with
Or
Suitable for All
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
Delivery
Delivery Not Available
Please select a location from the suggested list

A dirty hot wire or hot plate in the air flow sensor leads to incorrect readings for calculating the fuel/air mixture. The starting and idling properties of the vehicle are thus impaired, the engine performance is reduced and the fuel consumption increases. Also, dirty sensors on vehicles with automatic transmissions can cause shifting problems. Thanks to the use of the Air Flow Sensor Cleaner, an expensive replacement of the sensor can most likely be avoided.

Directions for use:

Disconnect electrical connection of the air flow sensor and remove the sensor. Spray generously onto dirty components such as the hot wire or hot plate and allow the dirt to drip off. Do not touch the sensitive components of the sensor. Allow the solvent to dry completely before installation. Application is recommended every time the air filter is replaced or when problems arise.

Note: Before using on plastics that are sensitive to solvents, especially on mechanically-loaded parts, test for compatibility.

Liqui Moly Air Flow Sensor Cleaner 158g

$21.99