EXTRA TEN technology offers the same engine wear protection at start up, but offers an extra layer of protection under all driving conditions compared to SAE10W-40 & SAE 15W-40 engine oils
FULL ZINC anti-wear additive package for ultimate engine wear protection
FULL SYNTHETIC base oil for outstanding protection and longer life
HPR10005 HPR 10 FULL SYN 10W50 5L ENGINE OIL
HPR 10 is a premium, full synthetic SAE 10W-50 engine oil. It features a DOUBLE LAYER of engine wear protection with FULL ZINC and Penrites advanced EXTRA TEN technology. It uses advanced additive technology and a low shear rate viscosity modifier, to ensure additional protection against wear, corrosion, oil oxidation, piston deposits and sludge under all conditions.
HPR 10 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is not suitable for use in Rotary engines. It is particularly suited for use under high load conditions such as towing and competition or where ambient temperatures are high.
HPR 10 is recommended for use in vehicles where SAE 10W-40 or 10W-50 engine oils were originally recommended by the manufacturer. It can be used where ACEA A3/B3 or A3/B4 is recommended in model years prior to 2017 and also where API SP and previous specifications SN, SM, SL, SJ or earlier specifications are recommended. It is suitable for use in many Diesel and LPG powered vehicles requiring an engine oil meeting API CF or older specifications. It is not recommended for use in diesel vehicles fitted with a DPF (Diesel Particulate Filter).
VEHICLES AND FUEL TYPES
HPR 10 is suitable for use in passenger cars, competition & high performance vehicles, 4WDs and light commercial vehicles and is compatible with Petrol, LPG (Dual Fuel), E10, E85 (competition), Diesel (Non- DPF) and other conventional and racing fuels. If using with E85, Penrite recommend more frequent service intervals. It is not recommended for use in motorcycles.
EXTRA TEN TECHNOLOGY
HPR 10 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
IMPORTANT INFORMATION WHEN CHANGING OIL.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
- EXTRA TEN technology offers the same engine wear protection at start up, but offers an extra layer of protection under all driving conditions compared to SAE10W-40 & SAE 15W-40 engine oils
- FULL ZINC anti-wear additive package for ultimate engine wear protection
- FULL SYNTHETIC base oil for outstanding protection and longer life
- BETTER high temperature protection than 10W-40 grade oils
- MAXIMUM wear protection, minimum sludge formation & reduced piston deposits
- Reduces oil consumption and maintains oil pressure
- Longer engine life by reducing the formation of high temperature engine deposits
PRODUCT PERFORMANCE LEVELS
- ACEA A3/B4 (PRIOR TO 2017)
- API SN Plus
- API SP
- BMW LL-01
- BMW LL-98
- BMW Longlife-01
- Ford M2C153-F
- Ford M2C153-G
- Ford M2C905-A3
- Ford M2C910-A
- GM 9986126
- Holden HN 2100
- MB 229.1.
- MB 229.3.
- Peugeot PSA E-02
- Rover RES.22.OL.22
- VW 501 01
- VW 502 00
- VW 505 00
SUITABLE FOR USE WHERE SPECIFICATIONS BELOW ARE REQUIRED
- API SL
- API SM
- API SN
- API SN/CF
|Density at 15�C, kg/L||0.86|
|Viscosity, Kinematic, cSt at 40�C||127|
|Viscosity, Kinematic, cSt at 100�C||18.6|
|Cold Cranking Viscosity, cP at -25�C||5842|
|Zinc, Mass %||0.106|
|Phosphorus, Mass %||0.097|
|Sulphated Ash, Mass %||1.23|
|Total Base Number (TBN)||11.3|