Skip to content Skip to navigation menu

Penrite Enviro+ 0W-20 (Full Syn.) 5L - EPLUS0W20005

SKU: OA03891 Part Number. EPLUS0W20005
Base Oil: Full Synthetic
Viscosity: SAE 0W-20
For Petrol / E10, E85, LPG vehicles
Key Specifications: API SP Resource Conserving, ILSAC GF-6A, API SN Plus.
$74.99
4 payments of $18.75 with
Or
Check Suitability
Delivery Options:
Expand to view your delivery options
click and collect icon
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
delivery icon
Delivery
Delivery Not Available
Please select a location from the suggested list

EPLUS0W20005 ENVIRO PLUS 0W20 5L

ENVIRO+ 0W-20 is a premium, full synthetic, SAE 0W-20 engine oil. It uses an advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology and features low volatility synthetic base oil that minimises oil loss as well as an enhanced corrosion protection package for ensuring compatibility with ethanol based fuels such as E85.

ENVIRO+ 0W-20 is licensed by the API (American Petroleum Institute to meet SP Resource Conserving, SN PLUS and ILSAC GF-6A specifications for quality and assurance.

APPLICATION

ENVIRO+ 0W-20 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged petrol, low emission engines including petrol/electric hybrids.

Enviro+ 0W-20 may be used where SAE 0W-20 and SAE 5W-30 grade oils are recommended by the manufacturer. It can be used where ILSAC GF-3, GF-4 & GF-5 and GF-6A fuel economy oils are recommended and where API SP, SN PLus or earlier API specifications SM (2004-2010), SL (2001-2004) were recommended.

ENVIRO+ 0W-20 meets the requirements of API SP Resource Conserving and ILSAC GF-6A, providing improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection over API SN / ILSAC GF-5 grade oils.

ENVIRO+ 0W-20 can be used where fuel economy oils are specified such as Toyota 86 GT, Subaru BRZ, Jeep KL Cherokee 2.4 Litre, Mazda CX-5 and Nissan Altima models. It can also be used in Ford vehicles that specify M2C945-A and M2C947-A and in Chrysler vehicles specifying MS-6395 0W-20 engine oil.

It can be used in vehicles manufactured by -

ChryslerFordGM
HondaJaguarLexus
MazdaMitsubishiNissan
SubaruSuzukiToyota

VEHICLE AND FUEL TYPES

ENVIRO+ 0W-20

is suitable for use in passenger cars, 4WD’s & light commercial vehicles and can be used with Petrol, LPG (Dual Fuel & LPi Liquid Phase Injection), E10 as well as being a primary recommendation for everyday use with E85 fuel. It is designed for everyday use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is also suitable for late model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification. It is NOT recommended for use in diesel engined vehicles or in motorcycles with wet clutches.

Important Information when changing oil

NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

BENFITS

  • API LICENSED for SP Resource Conserving and ILSAC GF-6A oil specifications
  • IMPROVED engine durability, better fuel economy, increased wear protection.
  • ENHANCED LSPI (Low Speed Pre-Ignition) protection
  • REDUCED Turbo Charger Deposits
  • BETTER wear protection for “Idle Stop” engines
  • IMPROVED oxidation and deposit control and aeration
  • LONG Engine oil drain intervals
  • MAXIMISES fuel economy**
  • MAXIMUM engine life***
  • CATALYST and Oxygen sensor friendly
  • ETHANOL fuel compatible – Safe with E85
  • Suitable for HYBRID petrol/electric vehicles
  • Excellent resistance to viscosity and thermal breakdown even in extreme service
  • Superior cold engine start up performance, minimising friction and wear at start-up

*Low and mid SAPS oils may sometimes be referred to as “Low Ash” oils

**Combined fuel economy improvement of >2% compared to reference oil in the sequence VID test

*** Demonstrated in Sequence IV test result of 17% of maximum allowable wear

UnitWeightKG5
UnitLengthMM190
UnitWidthMM120
UnitHeightMM340
Density at 15°C, kg/L0.847
Viscosity, Kinematic, cSt at 40�C41
Viscosity, Kinematic, cSt at 100�C7.9
Viscosity Index168
Cold Cranking Viscosity, cP at -35�C5723
Zinc, Mass %0.089
Phosphorus, Mass %0.08
Sulphated Ash, Mass %0.85
Total Base Number (TBN)8.5
MANUFACTURER'S (OEM) APPROVALS & INDUSTRY LICENSESAPI�SN�Plus
API�SP Resource Conserving
ILSAC�GF-6A
PRODUCT PERFORMANCE LEVELSAPI�SN�Plus
API�SP
API�SP Resource Conserving
Chrysler�MS-6395
Ford M2C945-A
Ford M2C947-A
GMW 16182
ILSAC�GF-6A
SUITABLE FOR USE WHERE SPECIFICATIONS BELOW ARE REQUIREDAPI�SL
API�SM
API�SN
ILSAC�GF-3
ILSAC�GF-4
ILSAC�GF-5

Penrite Enviro+ 0W-20 (Full Syn.) 5L - EPLUS0W20005

$74.99